Product Introduction
This product is made from deeply refined base oil and added with appropriate amounts of anti-oxidation, anti rust, anti-corrosion and other additives. According to the 40 ℃ kinematic viscosity, it is divided into three viscosity levels: 100, 150, and 220.

Product Advantages
Good thermal oxidation stability can effectively reduce carbon deposition and inhibit oil aging, extending service life.
Good lubrication and rust and corrosion resistance prevent the piston and exhaust valve from rusting and corroding, extending the service life of compressor components.
Excellent anti emulsification performance, quickly separating from contact water.
High flash point and low volatility.

Typical data

Scope of Application
This product is suitable for piston and drip oil rotary air compressors with oil lubrication.

Precautions
Change the oil according to the recommended oil change cycle by the compressor manufacturer.
This product should not be used on chlorine gas compressors to avoid explosion.
Strictly control the intake temperature and regularly clean the carbon deposits in the exhaust valve and exhaust pipeline. Strictly control the appropriate amount of oil supply. Excessive oil not only causes waste and pollutes compressed gas, but also increases the generation of carbon deposits, which can cause explosions in severe cases.
During storage and use, do not mix in moisture or impurities.